Making a SketchUp tool - incorporating the mouse & keyboard

[BTM]

Other than finding out that my math is completely flawed (the larger the number, the smaller the pinch. I have to fix that...), I have also mannaged to make a script that will draw a line starting at [0, 0, 0,], and going to wherever you input into the control box. Now, how would I change it so what's input into the box is in meters?

` model = Sketchup.active_model
entities = model.entities
selection = model.selection

prompts = ["X", "Y", "Z"]
defaults = ["0", "0", "0"]
list = ["", "", ""]
results = UI.inputbox prompts, defaults, list, "Input X, Y, Z."
pt1= Geom::Point3d.new results.to_i
pt2= [0, 0, 0]
edges = entities.add_edges pt1, pt2`

[Chris Fullmer]

SU will work in the default unit that the user has set. So you might be best not trying to force it into meters.

And your defaults:

defaults = ["0", "0", "0"]

Since you have the zeros in quotes, it will treat the user input as a string. So you would need to convert each answer to a float. OR if you remove the quotes and use 0.0, 0,0, 0,0 then it will treat whatever the user inputs as a float, which is what you want to use (or an integer) to make a point3d object.

Then what you posted works like a charm.

[BTM]

... Yeah, that would help; it still works as it is though, because I switch it using .to_i later on.

...Also, it seems to make a value of 1 to be 0.0254m, and my default is in meters. This value of 0.0254m also seems to be the value at which sketchyphysics joints like sliders use (if I type in 1 in the joint max, it's max is 0.0254m).

[Chris Fullmer]

It doesn't work for me the way its posted. I got an error teling me that it couldn't convert an array ( results) to an integer. For me I needed to convert each element of the array separately.

Unit conversions are still important. Here's the trick. SU works in the users default unit. So if you are in meters and type 1 into the box, its already in meters. Or you could over-ride it and enter 1cm into the box. But now its a string. Convert it to a length with .to_l Here are som examples to run one at a time:

distance = "2000cm".to_l.to_m
distance = "50km".to_l.to_m
distance = "2000'".to_l.to_m

the .to_l converts whatever it is given into the default base unit. Then .to_m converts whatever it is given to meters. Does that make sense? Play with those and check out the entire Numeric Class:

http://code.google.com/apis/sketchup/docs/ourdoc/numeric.html

Hope that helps with converting,

Chris

[Chris Fullmer]

Hmm, I see, I think that I do have something wrong about the base units. I suppose SU always works in inches and you have to always convert back to .to_l to get to the default base unit? I've clearly confused myself.

[BTM]

2 things;

first; really? It didn't work for you at all? Ah well, I'm mostly playing around, and with it written out like you said, it works too.

second; I don't think it's in the user's default length automatically, because as I said, for me it works as 0.0254m, or 1 inch. My default is set to meters.

UPDATE: I wrote that before You finnished writing your last post. Sorry

[Chris Fullmer]

Yup, if I run it in the webconsole just as you have it written, I get this error:

(eval):9:in ‘initialize’: undefined method ‘to_i’ for ["1", "1", "1"]:Array

It doesn't like converting the array to an integer. It wants each element of the array to be converted separately on my machine. SU7

[BTM]

` model= Sketchup.active_model
@ent= model.entities

prompts = ["X", "Y", "Z"]
defaults = [ 0.0.to_l, 0.0.to_l, 0.0.to_l]
list = ["", "", ""]
results = UI.inputbox prompts, defaults, list, "Input X, Y, Z."
pt1= Geom::Point3d.new results
pt2= [ 0, 0, 0]
line = @ent.add_edges pt1, pt2`

[BTM]

That's strange. .to_i worked fine on my mac.

[Chris Fullmer]

Hey!!!! Great job. I was really confused how on earth to get the inputbox to work in the default units! That did the trick though, setting it to 0.0.to_l. I really couldn't figure that out.

So there you have it, 0.0.to_l makes the inputbox work in the default units. Thanks for posting the solution before I went crazy!

Chris

[BTM]

@chris fullmer said:

you might need to provide a way to make and place construction points.

` model = Sketchup.active_model
@ent = model.entities

prompts = ["X", "Y", "Z"]
defaults = [ 0.0.to_l, 0.0.to_l, 0.0.to_l]
list = ["", "", ""]
results = UI.inputbox prompts, defaults, list, "Input X, Y, Z."
pt1= Geom::Point3d.new results
@ent.add_cpoint pt1`

[Chris Fullmer]

Excellent

[BTM]

... Now I need to figure out where in the class to put that . I'm still not that fond of what defs do what exactly.

[Chris Fullmer]

I think you'll probably put it in its own method.

If you want it to be the first thing run every time the user begins the script, then you can call that method at the bottom of the activate method.

And then call other methods from the onReturn method probably (though onLbuttonUp is common too). So it works like this, if you want your script to advance when the user hits enter, then call all YOUR methods from the onReturn method. It only gets triggered when the user hits enter/return. So only call your method from within onReturn and it will only get run once they hit enter. Here's an example of how it could flow

Your "add cpoint" method gets run from the activate method because that is run everytime the user starts the tool. So that will run your construction point right off the bat. Then the user should click on a vertex to specify that vertex as the center of operations. So you would have code in the onLbuttonUp method that yould trigger when they click the mouse. It should take the InputPoint and store it as some @centerPoint variable, assuming its a vertex they clicked on).

Once the cpoint is set and the centerpoint is selected, you could pop up a UI.inputbox asking what radius to use. When they hit enter, then you run a method that does all the calculation and drawing/transforming.

The way I described it there did not require the user to hit enter, so all that would be run from the onLButtonUp method then.

Seriously a tool with the mouse, and with transformations. Nearly as hard as it gets, but do-able. Good luck!

Chris

[BTM]

One problem i'm having is not knowing what to enter in the grayed in area. I thought that Pinchmover, the name of the class, would work, but it doesn't. What does?

[Chris Fullmer]

Sketchup.active_model.select_tool Pinchmover.new

And you will also need to move that to the bottom of the script. You can't instantiate the class until after it has been defined. Just put all your menu work at the bottom of the script.

Chris

[Chris Fullmer]

Just the name of the class doesn't work, because with "tools" you are making special classes that Sketchup watches. So you have to tell sketchup to start your class as a tool.

[BTM]

Okay
Man, I've got a LOT to learn

[BTM]

` require "sketchup.rb"

class Pinchmover

	def activate
	@model = Sketchup.active_model
	@ent = @model.entities
	@view = @model.active_view
	@slct = @model.selection
	@slct.clear
	end

	def onLButtonUp(flags, x, y, view)
	ip = view.inputpoint x,y
	pt = ip.position
	pt2 = Geom::Point3d.new pt
	@cpoint = @ent.add_cpoint pt2
	end

end

plugins_menu = UI.menu("Plugins")
item = plugins_menu.add_item("Pinch Mover") {
Sketchup.active_model.select_tool Pinchmover.new
}`

I like mouse interaction and inferencing better than a dumb little inputbox
... Now to get it to make only ONE cont.point ...
... And THEN a way to select an endpoint for the tool to use as the centerpoint of the pinch

[BTM]

; But now I think I know how to tackle both issues at once