Speed Indicator Problem Fixed
-
i noticed that all previous attempts at a speed indicator were not functional. i figured out how by using the ontouch feature. check the model and play the sim. when speed is increased(press up arrow key), the arrow will move(right meter). but most other attempts depended on controller input. for example: if you put a control slider and increase it to full speed, the example vehicle would take some time to speed up, but the meter would move to the position indicated on the slider. it shows the intended speed, not the true speed. to fix this i used an arrangement of boxes one behind the other, all set to change a single variable to a higher figure when touched. i placed another box in front of all the boxes, connected to a spring, so upon being subjected to acceleration, the box would trail behind a bit, touching the boxes and resetting the variables.
-
Interesting developpement, I like the way you manage flight parameters indicators
have a look on this thread , could be useful :http://www.sketchucation.com/forums/scf/viewtopic.php?f=15&t=16632&p=131285&hilit=+dimension#p131227MALAISE.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Advertisement