Rogue's W.I.P's!

[Roguer1]

Here is another model I'm working on. I just started it a little while ago.

I really can’t find any good reference images for this model of the Mondeo if anyone knows where to find any that would be great. I am also going to model the Hatchback version and the British Touring Car Championship yellow and bleu one (I can hardly find any images of that either)

[geh4evr]

Rogue, Have you decided to use my renders?

[Roguer1]

@geh4evr said:

Rogue, Have you decided to use my renders?

Which ones are these?

[KDSDESIGN]

Another WIP? it seemed like just an hour ago when you said
@unknownuser said:

Here are some renders of the GT70

http://rogueautomotivedesign.webs.com/apps/photos/photo.jsp?photoID=24209373
http://rogueautomotivedesign.webs.com/apps/photos/photo.jsp?photoID=24210493

And here is a little work on the Flex model...

[attachment=3:3es4rf3a]<!-- ia3 -->Ford Flex.jpg<!-- ia3 -->[/attachment:3es4rf3a]
[attachment=2:3es4rf3a]<!-- ia2 -->Ford Flex..jpg<!-- ia2 -->[/attachment:3es4rf3a]
[attachment=1:3es4rf3a]<!-- ia1 -->Ford Flex...jpg<!-- ia1 -->[/attachment:3es4rf3a]
[attachment=0:3es4rf3a]<!-- ia0 -->Ford Flex....jpg<!-- ia0 -->[/attachment:3es4rf3a]

_< FINISH SOMETHING

[Roguer1]

Just to let you all know I will be gone for a few weeks, maybe more.

I’m getting my computer checked out by Toshiba and it may be gone for a few weeks or longer. I ma getting my HDD replaced and a full hardware check.

Don’t expect a reply to any messages you send for at least that time but when I come back I should be more active here than ever before.

[Roguer1]

Well, I am able to get on another computer every now and again so I can still post every few days.

Here are a few models I will make from the next Cobra.
These are only to give a rough idea of what it will look like, inface the Maverick set I used to model the last one.
They are only quick blueprints so they are a bit crude, especially the Cougar.
Please don't re-use them or model from them, if you wish to edit them to show me variants pleas only upload them to this topic.

I hope you like them

[RayOchoa]

i like your sketch style very technical

[Roguer1]

Thanks for noticing that they are just sketches. I'll clean them up a bit nad make them more accurate once I finish the models

[RayOchoa]

Resembles a mustang a bit doesnt it?

[Roguer1]

@rayochoa said:

Resembles a mustang a bit doesnt it?

Well, yes.....Thats what it is.

The Mercury Cougar was built from the same model year Mustang and the Maverick was a small version of the Mustang.

Thats why Ford should make the Cougar again. They already have the Mustang to build from and it would be a great model to boost the Mercury range.

[BLANK]

I've been working on some wheels lately and I thought it might be time to (place Obama reference here). I noticed that you make wheels using a 100-faced circle . What I did is double the standard amount to 48. I could try 96, but size is an issue.

Here's an example I did for Alex's Viper:

![Everything except for the brake pads and the disk vents were "enhanced"](/uploads/imported_attachments/ENwC_2.png "Everything except for the brake pads and the disk vents were "enhanced"")
And yes, first attempt.

[FioranoJC]

Yo Shams,

WTF MAN

So cool, So good, So pro style! Im busy with this:
Ferrari Tipo 500 F2 ( Old ferrari Racer )

Just started with the wheels caus theyre the most important thing of that car.
Butta, after seeing your 46 circle.. mmm Intressting. I might start all over again but after im finished with this wheel.

[Roguer1]

Its good to see people talking about wheels for once. I have been making them for ages now and people only seem interested in the next car, usually my wheels hint towards that as I also try to make my wheels first or when I get stuck in a model (yes I often get stuck)

Any way, that Viper wheel is looking great, very detaild and clean.
I often use 100 sides because I usually make 5 spoke wheels and I cant be bothered making a new tyre for every one.

@fioranojc said:

Im busy with this:
Ferrari Tipo 500 F2 ( Old ferrari Racer )

Cant wait, although if its done with'n the next few weeks I wont be able to see it.

[Roguer1]

It looks interesting but I think I'll just try to stick with the 5's I know. The Ford inspired ones.

Also feel free to catch up on my image uploads on my website
http://rogueautomotivedesign.webs.com/apps/photos/

[Roguer1]

Here is a little update for the Trojan Cobra:

[Roguer1]

I have done a little more on my Mach II

I have also found a picture of another similar Ford Concept, only picture I can find...

more info: http://www.ponysite.de/Mach1history.htm

[Roguer1]

Now that I'm back, here is some more stuff

My first model made in SketchUp 7 Pro
http://sketchup.google.com/3dwarehouse/details?mid=bd8b8dae85745dc61d7499a6ca2305ee

[Roguer1]

Im getting no discussions here again....

New model:
http://sketchup.google.com/3dwarehouse/details?mid=77cc8819b15c187f308db5b674b9975c

[Marian]

Well, your work is good, we all know that, not much to discuss about that, except if you have an idea or you want advice.

[Roguer1]

Thanks Marian

Here is another wheels, its from the 2010 Ford Taurus SHO
http://sketchup.google.com/3dwarehouse/details?mid=89098b35adf27910cac6f4f313ef6248

This has been one of the hardest wheels I have made so far