All Ancient Rome models from 3DWarehouse together

rev3rse

OMG!! That apse was wonderful.. a little challenge to modeling in SU..
@L.VII.C. Good rendering, pay attention with Kerkythea for light settings, and material editor..
Now I'm trying with the cell of the temple of Venus and Rome. The goal is a realistic rendering: a dark room with the only light of candles and "fog" produced by incense, and it's very, very, very hard...

Aerilius

@rev3rse said:

Where did you find the pictures?
I've never been in Leipzig, but I saw the exhibition about emperor Constantine the Great in Trier (oldest town in my country). Yadegar Asisi made a panorama (3d) of the colossus of Constantine, that showed the magnitude of the 12 m high statue, although this panorama was in a quite small room.

At this exhibition, I read about the panorama "Rom 312", the images above are scanned from a poster (I would like to have it as wallpaper).

@ L.VII.C:
It looks amazing!!! Very clean, as if it was newly built! Maybe you can play a bit with soft shadows (settings -> scene -> lights, select sun and choose shadow radius ca. = 300). Also in some cases, it can be useful to use Sketchup circles with more than 24 edges. When you select the circle tool, type the number of edges and hit enter. (or less edges for smaller details)

L.VII.C

Aerilius
rev3rse

Thanks for the advice, I will take this into in the future

Danik

I also tried to render some of my models in Kerkythea There are pictures of my basilica of Maxentius. Actually, they have a number of bugs wint lighting.

Aerilius
It is an interesting picture of Constsntine statue! If you have any other pictures of basilica of Maxentius and can share them, I would be very much obliged to you

rev3rse

@danik said:

I also tried to render some of my models in Kerkythea There are pictures of my basilica of Maxentius. Actually, they have a number of bugs wint lighting.

Aerilius
It is an interesting picture of Constsntine statue! If you have any other pictures of basilica of Maxentius and can share them, I would be very much obliged to you

That model was so outstanding!! A big piece of art...
I posted my rendering of the cell of Temple of Venus and Rome in another thread for suggestions in render settings..
This was the result of a little experiment:

Ah..P.S. for People: rev3rse = saikindi...

L.VII.C

Danik
rev3rse

Excellent and great! Bravo!

rev3rse

Salve saikindi
I am delighted with your models of Roman buildings

pichuneke

I wasn't suscribed to this topic and I haven't read you untill now!

As you see Kerkythea is very easy to use. You could improve the rendering using bump mappings. I believe that for the bump mapping texture you can use the same texture for the friezes. (Bump mapping creates a "false" 3D over flat surfaces).

I keep trying to export your models to Unreal Development Kit, but my progress is very slow. Exporters to .ASE format don't work perfectly...

rev3rse

I think the normal mapping or displacement (expecially for decorations or basreliefs, if present) would be a good enhancement for this type of buildings. It's necessary improve some textures, like the ones for the Sacra Via and the plaza, and adapted for the entire area to avoid that bad tiling effect...
The realism to obtain with rendering should be like this work by alekk1985:

tomislavm

What to say, excellent and great!

L.VII.C

rev3rse

@unknownuser said:

I think the normal mapping or displacement (expecially for decorations or basreliefs, if present) would be a good enhancement for this type of buildings. It's necessary improve some textures, like the ones for the Sacra Via and the plaza, and adapted for the entire area to avoid that bad tiling effect...
The realism to obtain with rendering should be like this work by alekk1985:

Excellent sreens! Very realistic . And what program made this model? Of course this is not Sketchup
3D Max?

rev3rse

That model was made with Blender, but the realism is obtained with good and realistic textures and a well done rendering of model.. ie your model of Roman Forum is perfect, but for a realistic rendering you need to change some textures with better ones..
This is a free site where we can found some excellent textures: http://www.cgtextures.com/

Another version of my model of the cell (Venus and Rome) with reflections and bump mapping for mosaic floor...

MLT Render [Cell of temple of Venus and Rome]

rev3rse

This is a little model with beautiful ornament from cgtextures, and the result is very realistic...

Ornament textures from CGTextures

Ornament SU6 File

L.VII.C

rev3rse

@unknownuser said:

This is a free site where we can found some excellent textures: http://www.cgtextures.com/

Wow! Thank you very much!

rev3rse

Ok, this is another model, perfect for friezes of temples, for better realism...

Corinthian Frieze

Corinthian Frieze 2

ELYSIUM

rev3rse can you please please please share that great frieze!

tks!!

rev3rse

@elysium said:

rev3rse can you please please please share that great frieze!

tks!!

Hi Elysium, you did a similar big work with your models.. I saw some screenshots from your thread of republican forum...

For thr model of frieze, I was improving textures for coffers between the capitals and fixing the tiling for perfect alignment with the centre of symmetry in the frieze (the central palm) and capitals.

This is a little preview with corinthian capitals by fun856 in 3DWH:

File (a little heavy file...) without capitals attached

Corinthian architrave and frieze

Symmetry in decorations and mouldings

Corinthian Frieze

pichuneke

I have always thought that Dinamic Components would fit perfectly for the greek and roman ionic, chorintian... columns and friezes. As they had exact proportions and distances according vitrubius it would be easy to make a big building with a dinamic component, automatically repeating the columns with the right distance. You know, in the real word there would be differences respect theory. I don't know if you could adjust it in a dinamic component through a dialog box.

I can't do that, I use the free version of Sketchup (I have never earned money with it). But I give you the idea, if someone wants to do that.

Guide to make Columns (Vignola): http://www.unav.es/ha/009-TRAT/vignola-daviler.htm

ELYSIUM

Tks rev3rse!!

The entablature looks great!!

You can optimise it by lowering the number of lines on the round parts of the cornice and the architrave. The entablature is usually a relatively distant element in a render, so there isn't a need for much detail.
I have a good Corinthian column that might be useful on your model, i made it from bits and pieces that i found on the warehouse, improving them all a little. The column shaft for example is yours. It just needs some texturing.

Column C.skp

Column C.jpg

rev3rse

pichuneke:

I've thought to DC already, 'cause the length of the frieze and architrave is modular. The problem is the angle, with 4 dedicated different modules, but the construction is really fast.

Modules

ELYSIUM:

Yes, the rounded mouldings can be simplified in 1 second. For columns, I changed the capital, that in fact it's not of corinthian order, the leaves aren't of acanthus. I maintained the proportions fot the shaft and capital (thanks for using my shaft ), it's possible replace that shaft (with a thousand of polys) with a flat shaft, so the model is little and not too complex, especially for time rendering.

This type of entablature is for an eustyle temple, so the columns should be 9,5 diameter height (Vitruvius rules) that I've adjusted...

Aerilius

@Danik: Your work is so great and realistic!

So now it is complete. As I have already announced, I would like to 'jump' into these models. But as my screen is too important for doing this, I have to be content with just viewing a panorama.

[flash=500,400:zzav6gdp]http://www.you3dview.com/viewer/viewer.swf?xml=http://www.you3dview.com/flvideo/232/viewer.xml[/flash:zzav6gdp]