[Plugin] Bitmap To Mesh

Reply to [Plugin] Bitmap To Mesh on Fri, 23 Sep 2022 18:00:45 GMT

Rich O Brien — Fri, 23 Sep 2022 18:00:45 GMT

Quick maths

500 x 500 = 250,000 planar faces. 500,000 if it ends up triangulated.

You should stick to 64 x 64 or below.

SketchUp will eventually create a mesh of 250,000 and you'll be able to orbit fine. But the creation part will take time.

Reply to [Plugin] Bitmap To Mesh on Fri, 23 Sep 2022 17:27:58 GMT

rayqian — Fri, 23 Sep 2022 17:27:58 GMT

this is a great plugin for customize tiling texture, while the sketchup has no responding when I import a 500*500 pixel test BMP file as an image and run "mesh from bitmap", see the screenshot.

Reply to [Plugin] Bitmap To Mesh on Fri, 29 May 2020 23:07:11 GMT

Triumfi — Fri, 29 May 2020 23:07:11 GMT

The arrows for reducing pixels or polygons does not show, when i bring the cursor to the red line, any idea ??

Reply to [Plugin] Bitmap To Mesh on Wed, 04 Sep 2019 17:00:05 GMT

david_h — Wed, 04 Sep 2019 17:00:05 GMT

The texture is fine, using Photoshop of course. i was just playing to see if I could get it to work in 3D

Thx,

There's a hole in the bucket. . .dear Liza.. .dear Liza. . .

Reply to [Plugin] Bitmap To Mesh on Wed, 04 Sep 2019 16:05:02 GMT

Dave R — Wed, 04 Sep 2019 16:05:02 GMT

Probably a good idea to use the image as a texture. Reminds me of the curtain slides that would show during intermissions in the old black and white films.

Holey if the water won't stay in.

Reply to [Plugin] Bitmap To Mesh on Wed, 04 Sep 2019 15:34:33 GMT

david_h — Wed, 04 Sep 2019 15:34:33 GMT

So i discovered. I got it to work with one panel, but the results were underwhelming. I think I will just use the image and a call it a day.

Holy Buckets???

Reply to [Plugin] Bitmap To Mesh on Wed, 04 Sep 2019 15:32:24 GMT

Dave R — Wed, 04 Sep 2019 15:32:24 GMT

Holey buckets! There's a lot to process there. I can imagine your puter needing to take a break now and then. It would help if you can reduce the size of the image to one panel although it might still be a lot of work. It'll certainly create a lot of geometry.

Reply to [Plugin] Bitmap To Mesh on Wed, 04 Sep 2019 15:25:37 GMT

david_h — Wed, 04 Sep 2019 15:25:37 GMT

So team: I haven't used this plugin in a while, and I may be doing something wrong. I am trying to make a mesh obviously. .. from a BMP of this image and all it does is stall out my Puter. What am I doing wrong? Something wrong iwth the image? not enough contrast?

thx,

p.s. I guess i could crop it to one panel and just repeat the model. Would that help?

Reply to [Plugin] Bitmap To Mesh on Thu, 04 Jul 2019 11:15:56 GMT

TIG — Thu, 04 Jul 2019 11:15:56 GMT

I guess that thomthom's code uses Ruby API calls that are only available with newer versions of SketchUp.
So looks like v8 can't hack it ! Sorry.

Reply to [Plugin] Bitmap To Mesh on Wed, 03 Jul 2019 21:07:39 GMT

sketchartist023 — Wed, 03 Jul 2019 21:07:39 GMT

Think I could get a working script of this for sketchup8? I cant seem to want to update because I have a LOT of plugins that work well together already

Reply to [Plugin] Bitmap To Mesh on Wed, 15 May 2019 02:56:40 GMT

SpookyChick1013 — Wed, 15 May 2019 02:56:40 GMT

I no longer do business with Dropbox. Long story.

I did solve the problem. Somehow an earlier version of the plugin got left behind when I updated it the other day. Removed it, no more problem.

Thanks anyway.

Reply to [Plugin] Bitmap To Mesh on Wed, 15 May 2019 02:05:56 GMT

Dave R — Wed, 15 May 2019 02:05:56 GMT

How about uploading the BMP to DropBox and sharing the link.

What did you update a few days ago?

Thanks on the signature.

Reply to [Plugin] Bitmap To Mesh on Wed, 15 May 2019 01:33:39 GMT

SpookyChick1013 — Wed, 15 May 2019 01:33:39 GMT

Thanks Dave; I would, but .bmp extensions are not allowed. (just tried to upload the bmp as an attachment) Besides, I think the problem may be something tweaked with the plugin in regard to it's interaction with SU 2017. Since I updated a few days ago, the plugin keeps trying to make a second copy of the mesh at the time when it completes the first, and throws an error.

By the way, been meaning to say this for years, I like your signature.

Reply to [Plugin] Bitmap To Mesh on Wed, 15 May 2019 00:49:54 GMT

Dave R — Wed, 15 May 2019 00:49:54 GMT

How about sharing the BMP file so we can see it and maybe help you out?

Reply to [Plugin] Bitmap To Mesh on Wed, 15 May 2019 00:28:19 GMT

SpookyChick1013 — Wed, 15 May 2019 00:28:19 GMT

2017/SketchUp/Plugins/tt_bitmap2mesh/error_reporter/error_reporter.rb:289:in each' C:/Users/Mistress Venhallyn/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/tt_bitmap2mesh/error_reporter/error_reporter.rb:289:in trigger_event'
C:/Users/Mistress Venhallyn/AppData/Roaming/SketchUp/SketchUp 2017/SketchUp/Plugins/tt_bitmap2mesh/error_reporter/error_reporter.rb:250:in block in create_dialog' SketchUp:1:in call'

Having problems with this plugin not generating things Bitmap iin this case was 128 pixels on a side, no colorspace info, etc. Just the way it's supposed to be. I'm now stumped.

Thanks in advance help is greatly appreciated

Reply to [Plugin] Bitmap To Mesh on Sun, 11 Nov 2018 23:33:38 GMT

Leander_Galanodel — Sun, 11 Nov 2018 23:33:38 GMT

Hello!
I just wanted to say THANK YOU for this great plugin! It saved me a lot of time. I could just import a heightmap instead of having to trace over a topographical map by hand. You saved me about a few weeks of work!
If I ever upload my finished "project" to the 3D-Warehouse I will put a link to this plugin in the description.

Thank you very much!!!

Reply to [Plugin] Bitmap To Mesh on Wed, 28 Feb 2018 12:39:45 GMT

thomthom — Wed, 28 Feb 2018 12:39:45 GMT

Version 1.0.0

See first post for more details: https://sketchucation.com/forums/viewtopic.php?f=323&t=31339#p275772

Reply to [Plugin] Bitmap To Mesh on Thu, 03 Nov 2016 20:30:16 GMT

HornOxx — Thu, 03 Nov 2016 20:30:16 GMT

Hi All, I was just playing something around this evening

Some people succeed in lasering or engraving contours into a thick glass somehow - I have no idea how
thay do it so this little exercise, to put the author Thomas Mann in thick glass, should just imitate this nice gimmick …

such a great plugin - thanks for it!

Reply to [Plugin] Bitmap To Mesh on Tue, 12 Apr 2016 22:35:16 GMT

Efrado — Tue, 12 Apr 2016 22:35:16 GMT

It is a pity.
Thank you Thomas, and you too Tig.
I will look forward to upgrade every thing.
Thank you again and continue with the great job for us the sketchupers.

Reply to [Plugin] Bitmap To Mesh on Tue, 12 Apr 2016 11:30:16 GMT

thomthom — Tue, 12 Apr 2016 11:30:16 GMT

Only thing I can think of to run 10.6 would be to try one of the older versions of TT_Lib: https://bitbucket.org/thomthom/tt-library-2/downloads

Though you will then have less features and bug-fixes.

I'm also not sure which version might be compatible.

Reply to [Plugin] Bitmap To Mesh on Tue, 12 Apr 2016 11:28:53 GMT

thomthom — Tue, 12 Apr 2016 11:28:53 GMT

I'm afraid the 10.7 requirement is because I no longer have machines to build for older systems. For every release of OSX it gets harder to support these as well as older versions. I might have to drop 10.7 soon as well given the frequency of OSX releases.

Reply to [Plugin] Bitmap To Mesh on Tue, 12 Apr 2016 09:16:02 GMT

TIG — Tue, 12 Apr 2016 09:16:02 GMT

You have an old [now unsupported] OSX 10.6
As TT said, you need to have at least 10.7...

Can't you update your OS ?
There is the 'Software Update...' button on the 'About This Mac...' dialog...

If for some reason you can't upgrade your OS, then several Extensions [including this one] will not work...
That is the limitation, unless you change things...

Also SketchUp no longer supports v8 [and v2013 will cease shortly] - also several Extensions will no longer work in older SketchUp versions [this is often irrespective of the computer's OS, since they might rely on new API features, which are unavailable in those older SketchUp versions] - so why no 'bite-the-bullet' and upgrade both your OS and SketchUp version ?

Reply to [Plugin] Bitmap To Mesh on Mon, 11 Apr 2016 23:05:41 GMT

Efrado — Mon, 11 Apr 2016 23:05:41 GMT

HI Thom, this is what I have:

So what do I have to do in order to get your plugin works under this circumstances?

Reply to [Plugin] Bitmap To Mesh on Mon, 11 Apr 2016 20:30:19 GMT

thomthom — Mon, 11 Apr 2016 20:30:19 GMT

Hmm... That message about not being supported - it would indicate you have an OSX version older than 10.7. Though that seem rather old - as it incorrectly matching your system? What is your OSX version?